P1.875mm Flexible Curved LED Screen Display IP43 Indoor 800cd/Sqm
Application Of Soft LED Display
Under the increasingly demanding market requirements, led special-shaped display screen pays more attention to structural breakthroughs, and is more inclined to customers with special requirements and various occasions. However, for a long time before, LED special-shaped screens were realized by assembling or wrapping traditional rectangular planar modules, and the most common LED special-shaped screens were arc screens with large radian and planar circular screens. When the radian of the display screen is very small and the display form is more complex, it can not solve the problems of seam and flatness, resulting in inconsistent display, mosaic and other issues, making the overall effect of the display screen poor. In response to this problem, LED soft modules emerge as the times require, and many advantages are beyond the reach of ordinary arc display screens. The special-shaped screen connecting surface of the LED soft module is different from the traditional display screen, the traditional PCB board is made of glass fiber material, while the flexible module is equipped with a high-strength lock catch and link device, a flexible FPC circuit board made of a flexible insulating substrate, a mask and a bottom shell are made of rubber, and the special-shaped screen connecting surface of the LED soft module has high-strength compression resistance and torsion resistance. It can perfectly solve all kinds of problems of "beating around the Bush, corners and corners" installation difficulties.
Quick detail Of Indoor Flexible LED Screen
1, Pixel Pitch: 0.9375mm,1.25mm, 1.579mm, 1.667mm, 1.875mm, 2mm, 2.5mm, 3mm, 4mm
2, Quality and High Contrast SMD LEDs, Wide viewing angle: 140°/ 140°.
3, Greyscale: 16bits with NOVA Star MRV328
4, Cabinet size: Customized according actual application
5, Recommended Viewing Distance: 1-4m.
6, Cabinet Material: Aluminum Cabinet or mount to the steel structure directly
7, Refresh Rate: 1920-3840Hz
8, Ingress Rate: IP43 Indoor
9,Quality Certificate:CE, RoHS,FCC, ETL
11, Curve Installation: Yes, any kind of curve installation
Specification Of Indoor Soft LED Screen
|XT1.25||XT 1.875||XT 2||XT 3|
|Pixel Density||64,000 pixels/m2||284,444 pixels/m2||250,000 pixels/m2||111,111 pixels/m2|
|Module Dimensions(W x H) (mm)||240 x 120||240 x 120||240 x 120||240 x 120|
|Module Resolution||192x96||128 x 64||120 x 60||80 x 40|
|Panel Material||Die Cast Aluminum||Die Cast Aluminum||Die Cast Aluminum||Die Cast Aluminum|
|Weight per module||400g|
|Colours||281 trillion||281 trillion||281 trillion||281 trillion|
|Contrast Ratio||5,000 : 1||5,000 : 1||5,000 : 1||5,000 : 1|
|Average Power Consumption||200 W /Sqm||200 W /Sqm||200 W /panel||200 W /panel|
|Max Power Consumption||650 W /Sqm||650 W /Sqm||650 W /panel||650 W /panel|
|Brightness||>600 nits||>750 nits||>750 nits||>750 nits|
|Refresh Rate||>3,840 Hz||>3,840 -7680Hz||>3,840 Hz||>3,840 Hz|
|Vertical Viewing Angle||160°||160°||160°||160°|
|Horizontal Viewing Angle||140°||140°||140°||140°|
|Expected Lifetime||100,000 Hrs||100,000 Hrs||100,000 Hrs||100,000 Hrs|
|IP Rating (Front/Rear)||IP 43||IP 43||IP 43||IP 43|
|Operating Temp/Humidity||-20ºC - 50ºC / 10% - 90%||-20ºC - 50ºC / 10% - 90%||-20ºC - 50ºC / 10% - 90%||-20ºC - 50ºC / 10% - 90%|
|Storage Temp/Humidity||-20ºC - 50ºC / 10% - 90%||-20ºC - 50ºC / 10% - 90%||-20ºC - 50ºC / 10% - 90%||-20ºC - 50ºC / 10% - 90%|
|Scan Method||1/48 Scan||1/32 Scan||1/30 Scan||1/20 Scan|
Description Of Indoor Soft LED Display
1.1 Scope of application This specification only applies to the 240mm X 120mm modules in the XR series. The dot spacing includes XR0.9375/XR1.25/XR1.579/XR1.667/Xr1.875/XR2/XL2.5/XR3/XR4.
1.2 Main features:
--Module standardized size design 240mm X 120mm, low current, low heat, high contrast ratio above 5000:1, refresh 1920-3840 Hz, 14-18 bit gray scale, no delay and no smear in the image;
--The viewing angle is up to 160 °. XR soft module series is suitable for cylindrical screen, spiral screen, wave screen, ribbon screen and other artistic models. Application scenarios: planning museum, science and technology museum, urban planning museum, art gallery, museum, creative center, etc;
--The box structure adopts high-strength sheet metal sandblasting iron box with unique sectional splicing process, which effectively reduces the splicing gap of the screen body;
--The module is installed by strong magnetic adsorption, which can be adjusted slightly, and the flatness of the screen body is good. Power box front maintenance design, special scenarios, can achieve front installation, with specific tools to meet the front maintenance;
--The PCB board is made of flexible soft board, and the bottom shell is made of superior silica gel material;
Module thickness is only 8.6mm, ultra-thin design, small footprint;
1. 10 Years professional led display manufacturer
2. Short delivery time: 5-15 working days, adjustable according to customer request
3. Wholesale price
4. OEM and ODM service
5. Customizable product upon request
Q1. How does the semi auto corner protector work?
A: Gently push the button, the corner protector will release and cover the corner area.
A: Either stacking on ground or haning is supported.
A: Low MOQ, modules or complete screen order are all welcome.
A: Air freight, sea and train transport according to different region.
A: Mostly we accpet telegraphic transfer, 50% before production and 50% balance before shipment.
A: We manage quality starting from incoming material, all leds, ICs and PSU are pre-inspected then go to the production line.
The modules and complete screen will have at least 72 hours aging test, to make sure stable quality and performance.
A: We provide 1-3 years warranty for different product. Free Repair or Exchange of Defective Parts with One way Shipping