Send Message
Topbright Creation Limited
Mail: TEL: 86--18824669006
Home > PRODUCTS > HD LED Display >
Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution
  • Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution
  • Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution
  • Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution
  • Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution
  • Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution

Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution

Place of Origin China
Brand Name TBC LED
Certification FCC, CE, ROHS
Model Number P1.56
Product Details
Fine Pixel Pitch LED Display
Pixel Pitch:
Cabinet Size:
Front Service
Refresh Rate:
High Light: 

P1.56mm HD LED Display


3840Hz HD LED Display


P1.56mm Small Pixel Pitch LED Display

Product Description

Small Pixel Pitch P1.56mm HD LED Display 3840Hz 4K Resolution


4K Resolution P1.56mm Small Pixel Pitch LED Display 600x337.5mm 16:9 LED Panel 3840Hz


Indoor P1.56mm LED Small Pixel Pitch Wall Panels High Refresh Rate 3840Hz Refresh Rate​


Application Of P1.56mm Fine Pixel Pitch LED Display

The indoor high-end display market is dominated by DLP rear projection display, but DLP technology has natural defects, first of all, it is simply impossible to eliminate the 1mm spacing between display units, which can swallow at least one display pixel. Secondly, it is also inferior to the direct light-emitting LED display in terms of color expression. The particular shortcoming is that, due to the differences between DLP display units, resulting in the uniformity of color and brightness of the entire display is difficult to control, with the increase in product run time, the difference between units will also become larger and larger, the spacing is difficult to maintain consistently, and will become more and more obvious. The color difference between units and the adjustment of the spacing, even at a later stage of maintenance and repair, is a relatively difficult thing.

The biggest competitiveness of indoor small pixel pitch LED display is that the display is completely seamless and the display color is natural and true. At the same time, in the later maintenance, fine pixel LED display already has a mature point-by-point correction technology, the use of more than one or two years of display can use the instrument for one-time correction of the whole screen, the operation process is simple, the effect is also very good. Therefore, if the two are evaluated in terms of display quality, the high-density small-pitch LED display must be better than the DLP rear projection.


Quick detail Of P1.56mm Fine Pixel Pitch LED Display

1, Pixel Pitch: 1.56mm
2, SMD1010 LED, high contrast and high refresh rate
3, Greyscale: 16bits
4, Cabinet size: 600x337.5mm Die Cast Aluminum
5, Recommended Viewing Distance: 1-3m.

6, Cabinet Material: Die Cast Aluminum Cabinet, 8kg Light Weight

7, Refresh Rate: 3840Hz

8, Quality Certificate:CE, RoHS,FCC, ETL

9, Brightness:>600cd/sqm

10, Quick Installation: Yes, fast side lock for quick assembly and disassembly


Specification Of P1.56mm Fine Pixel Pitch LED Display

Product Unit Parameters


Mode P1.56mm
LED type SMD1010
Pixel pitch 1.56mm
Unit size W600×H337.5mm
Unit resolution 384×216 dots
Resolution 409,600dots/㎡
Unit direction Vertical Horizontal
Brightness ≥600nit
Weight 8KG/㎡
Max consumption 500W/㎡
Adv consumption 230W/㎡
Viewing angle H120°/V120°
Protection level IP43
Thickness 80mm

Heat dissipation


Convective heat dissipation
Power supply Power supply with PFC
Installation Fast install
Service Front
Control mode steady state
Color temperature 3200-9300K
Refresh rate 60Hz
Working temperature -40℃ to 70℃
Storage temperature -55℃ to 120℃
Life time ≥100,000 hours
Input voltage AC110-220V
Grey grade 16bit



Features Of P1.56mm Fine Pixel Pitch LED Display

1. Unit display case with 16:9 design, HD display point to point, no distortion and no compression of images.
2. Full front maintenance design, small installation space.
3. Ultra-thin design of the screen body, the thickness of the whole box is less than 40mm.
4. Secondary power supply design, the box power supply for low voltage, the use of high-efficiency module power supply, small heat generation.
5. Box power supply without cascade output, reducing the risk of failure of the connector.
6. Module intelligent detection (single-point detection, fault warning, temperature detection, etc.) and data storage functions (calibration data storage, production data storage).
7. Module using magnesium alloy die-casting bottom case, good flatness, bottom case and PCB and IC close together, good heat dissipation.
double backup design for control card and power supply, which can be applied to various demanding places.
8. Module and HUB adopt board-to-board professional connectors for more reliable performance.
system card can realize front and back maintenance.
9. The signal connection between the boxes adopts hidden HDMI docking, with more reliable performance and neat and clean rear part of the screen assembled.
10. High gray scale, high refresh, high contrast, low brightness design.


indoor p1.25mm small pixel pitch led display

indoor p1.25mm small pixel pitch led display

indoor p1.25mm small pixel pitch led display

indoor p1.25mm small pixel pitch led display


Our Services


1. 10 Years professional led display manufacturer

2. Short delivery time: 5-15 working days, adjustable according to customer request
3. Wholesale price

4. OEM and ODM service
5. Customizable product upon request




Q1. How does the service work?

A: We have experienced Engineers who worked in the industry for 15 years and able to communicate with fluent English. They can remotely provide technical support via video conference or teamviewer or go to the site for the guidance.

Q2. What installation options do we have?

A: Wall mounting with metal structures.

Q3. Do you have any MOQ limit for led screen order?

A: Low MOQ, modules or complete screen order are all welcome.

Q4. What's the shipping method?

A: Air freight, sea and train transport according to different region.

Q5. What's the payment method?

A: Mostly we accpet telegraphic transfer, 50% before production and 50% balance before shipment.

Q6. How do you control the production quality?

A: We manage quality starting from incoming material, all leds, ICs and PSU are pre-inspected then go to the production line.

The modules and complete screen will have at least 72 hours aging test, to make sure stable quality and performance.

Q7: How does warranty work?

A: We provide 1-3 years warranty for different product. Free Repair or Exchange of Defective Parts with One way Shipping

Contact Us at Any Time

Send your inquiry directly to us