P6.67mm Outdoor LED Advertising Display Front Service Energy Saving Low Power Consumption
Application Of Outdoor LED Advertising Display
The front maintenance LED full-color display has innovated the maintenance method. Compared with the traditional box rear maintenance, the front maintenance based on the unit module will be convenient. The hexagon wrench is used to insert and rotate from the front invisible maintenance hole, and the lock catch on the back of the module is opened, so that the module can be easily disassembled and maintained in a few seconds. The maintenance of LED full-color display screen is not only easy to maintain, but also much thinner and lighter than the traditional LED full-color display screen. The bearing weight of a single box is only 26 kg. There is no need for a special maintenance channel behind the LED full-color display screen, which is especially suitable for the installation environment with limited space or the LED full-color display screen installed on the wall. Because there is no need for a maintenance channel, the space requirement can be reduced.
Quick detail Of Outdoor LED Advertising Billboard
1, Pixel Pitch: 6.67mm, 8mm, 10mm
2, SMD3535 LED, high brightness and durable for outdoor use
3, Greyscale: 16bits
4, Cabinet size: 960x960mm Steel Or Aluminum Cabinet
5, Recommended Viewing Distance: 6-16m.
6, Cabinet Material: Cold Rolled Steel Cabinet, 50kg per Panel
7, Refresh Rate: 3840Hz
8, Ingress Rate: IP65 Outdoor Standard Connectors
9, Quality Certificate:CE, RoHS,FCC, ETL
11, Curve Installation: Yes, Concave and Convex Available
Specification Of Outdoor LED Advertising Screen
Product Unit Parameters
|Unit resolution||144×144 dots||120×120 dots||96×96 dots|
|Convective heat dissipation||Convective heat dissipation||Convective heat dissipation|
|Wind dissipaion||Level 12||Level 12||Level 12|
|Power supply||Power supply with PFC||Power supply with PFC||Power supply with PFC|
|Installation||Fast install||Fast install||Fast install|
|Fire resistance||Full VO grade||Full VO grade||Full VO grade|
|Control mode||steady state||steady state||steady state|
|Working temperature||-40℃ to 70℃||-40℃ to 70℃||-40℃ to 70℃|
|Storage temperature||-55℃ to 120℃||-55℃ to 120℃||-55℃ to 120℃|
|Life time||≥100,000 hours||≥100,000 hours||≥100,000 hours|
|Seismic capability||10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes|
Description Of Front Service Outdoor LED Advertising Billboard
TBC LED front service outdoor led advertising billboards include P10mm, P8mm, P6.67mm. Features are:
1. The outdoor full-color surface sticker module is a new product professionally designed by our company according to the market demand. PCB circuit board and kit are independently developed with mold opening design, and the installation and maintenance of 250 * 250mm snap-in front are more convenient and faster.
2. PCB two-layer circuit design. The thickness of TG150KB sheet metal is 1.6MM, and the thickness of sheet metal and copper reaches the industry standard. The IC adopts Jichuang North ICND2038S high-brush dual-cache chip with RUC7258 line decoding chip, which effectively suppresses the phenomena of uplink ghost and downlink afterimage caused by internal short circuit and open circuit of LED light-emitting chip.
Feature Of Ultra Light Weight Outdoor LED Advertising Billboard
Module comparison 1). Conventional product installation and maintenance requires more screws, which is very time-consuming. The aluminum bottom shell is designed with a side lock and free of screws, which can be easily maintained in two steps. 2). Exposed components of conventional products; The aluminum bottom shell is fully enclosed and wrapped to protect the components. 3). Conventional plastic products have low thermal conductivity and release harmful substances at high temperatures – polyvinyl chloride, with a recovery rate of only 1%. The aluminum bottom shell has high heat conduction point, good heat dissipation performance, no release of harmful substances, and the recovery rate is as high as 85%.
1. 10 Years professional led display manufacturer
2. Short delivery time: 5-15 working days, adjustable according to customer request
3. Wholesale price
4. OEM and ODM service
5. Customizable product upon request
Q1. How does the service work?
A: We have experienced Engineers who worked in the industry for 15 years and able to communicate with fluent English. They can remotely provide technical support via video conference or teamviewer or go to the site for the guidance.
A: Wall mounting with metal structures.
A: Low MOQ, modules or complete screen order are all welcome.
A: Air freight, sea and train transport according to different region.
A: Mostly we accpet telegraphic transfer, 50% before production and 50% balance before shipment.
A: We manage quality starting from incoming material, all leds, ICs and PSU are pre-inspected then go to the production line.
The modules and complete screen will have at least 72 hours aging test, to make sure stable quality and performance.
A: We provide 1-3 years warranty for different product. Free Repair or Exchange of Defective Parts with One way Shipping